/30 vs /31 Masks - Cisco Learning Network
192.168.0.3 - Broadcast address for 192.168.0.0 to which all hosts in the network respond. There are two usable addresses in this network. That is why they are used so commonly for WAN …
Subnetting Question - Cisco Learning Network
Taking the original 192.168.1.0/24 address space and subnetting to get a /30, /26 and /25 with the /30 at the beginning results in the following allocation. 192.168.1.0/30 --> assigned
192.168.1.0 /24 - Cisco Learning Network
Broadcast ID:192.168.1.11111111=192.168.1.255 Broadcast ID all the useable host set to 1 means it is an broadcast id host range is =192.168.1.00000001 to …
Subnetting Question - Cisco Learning Network
The whole network has a network address and subnet mask of 192.168.0.0/24 The answer to this is 192.168.0.192/27, but I don't understand how it got to that answer. When I worked it out, I …
Sub netting problem in packet tracer - Cisco Learning Network
Hello guys, i don’t know whether it’s the problem due to lack of my subnetting knowledge or it’s something wrong with PT. I have subnetted 192.168.1.0 255.255.255.0 into 192.168.1.1 …
Ospf wildcard mask - Cisco Learning Network
Hi, the interface ip is 192.168.1.1/24 What is the difference it makes between the below . does it makes any difference in lsa and lsdb 1 router ospf 1 network 192.168.1.0 0.0.0.255 area 0
Problema de overlaping - Cisco Learning Network
Estoy tratando de configurar un router en packet tracer de la siguiente forma g0/1 ip 192.168.0.1/24 y s0/0/1 ip 192.168.0.253/30. Parte de la configuración se puede ver abajo.
"show ip route" question - Cisco Learning Network
Then I assign the interface next to it a different subnet 192.168.1.2 255.255.248.0. So now I have 2 subnets but I don't realize that, one is /29, the other one is /21.
NAT/PAT - Cisco Learning Network
Configure R2 with a NAT pool that uses the first two addresses in the 209.165.202.128/30 address space. The fourth address is used for static NAT later in Part 2.
Why isn't my DHCP working? I have set up one subnet with …
Feb 13, 2025 · I have set up one subnet with 192.168.10.0 addresses (second subnet - 192.168.20.0, third subnet - 192.168.30.0) but the DHCP doesn't work still. See images for …